Bosch Intellic EFAS-4.11 - Serial Interfaces D7 and D8; Pulse Interfaces B6, B7, B8, and D6

73
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
SrvID
hex
EFT
hex
DTC Symbol
Display text
Description and trouble-shooting
S132 - - - -
!  dd.mm.yy
Card expiration date
(slot 1)
Meaning / Cause:
Is displayed xx days before the card expiry date (dd.mm.yy),
where xx is determined by the parameter RDI = F993 (default =
60 days).
S133 - - - -
!  dd.mm.yy
Card expiration date
(slot 2)
Meaning / Cause:
Is displayed xx days before the card expiry date (dd.mm.yy),
where xx is determined by the parameter RDI = F993 (default =
60 days).
S134 - - - -
!  dd.mm.yy
Card data download
(slot 1)
Meaning / Cause:
Is displayed xx days before the last possible date of a card
download, where xx is determined by parameter RDI = F994
(default = 5 days).
S135 - - - -
!  dd.mm.yy
Card data download
(Schacht 2)
Meaning / Cause:
Is displayed xx days before the last possible date of a card
download, where xx is determined by parameter RDI = F994
(default = 5 days).
S136 - - - -
!  dd.mm.yy
Mass storage
download
Meaning / Cause:
Is displayed xx days before the last possible date (dd.mm.yy) of
a download of the mass storage of EFAS, where xx is determined
by the parameter RDI = F995 (default = 10 days).
S137 - - - -
!  dd.mm.yy
Calibrate tachograph
Meaning / Cause:
xx days before the last possible date (dd.mm.yy) of a calibration
of EFAS to be carried out, where xx is determined by the param-
eter RDI = F996 (default = 60 days).
S138 FF
 dd.mm.yy
expire date
tachograph
Meaning / Cause:
Is displayed xx days before the expiration date of the tachograph,
where xx is determined by the parameter RDI=F996 (default=60
days).
Measure:
Tachograph must be replaced.
S140 01 40 00 000200
!  Card
invalid
(slot 1)
Meaning / Cause:
A generation 1 card was inserted into card slot 1, however the
tachograph only accepts generation 2 cards.
Measure:
Use Generation 2 card.
S141 01 40 00 000300
!  Card
invalid
(slot 2)
Meaning / Cause:
A generation 1 card was inserted into card slot 2, however the
tachograph only accepts generation 2 cards.
Measure:
Use Generation 2 card.
S142 01 40 00 000200
!  Card
invalid
(slot 1)
Meaning / Cause:
The type of card inserted in card slot 1 is currently not accepted
by the tachograph. For example, once the tachograph has
expired, no driver cards will be accepted; in case of serious errors,
only workshop cards and control cards will be accepted.
S143 01 40 00 000300
!  Card
invalid
(slot 2)
Meaning / Cause:
The type of card inserted in card slot 2 is currently not accepted
by the tachograph. For example, once the tachograph has
expired, no driver cards will be accepted; in case of serious errors,
only workshop cards and control cards will be accepted.
S144 01 40 00 000200
! Card
invalid
(slot 1)
Meaning / Cause:
Card access error in card slot 1.
Measure:
Clean the card and insert it again.
S145 01 40 00 000300
! Card
invalid
(slot 2)
Meaning / Cause:
Card access error in card slot 2.
Measure:
Clean the card and insert it again.