Bosch Intellic EFAS-4.11 - Page 85

75
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
SrvID
hex
EFT
hex
DTC Symbol
Display text
Description and trouble-shooting
S200 - - - -
> Input error <
“SrvID:S200 see manual”
Meaning / Cause:
With manual input of the driver’s activities the maximum number
of 20 activity changes per shift has been exceeded.
S201 - - - -
> Company lock <
“SrvID:S201 see manual”
Meaning / Cause:
Company lock cannot be activated or deactivated as another,
conicting tachograph smart-card is present in EFAS.
Measure:
Remove the conicting card and repeat the operation.
S202 - - - -
> Company lock <
“SrvID:S202 see manual”
Meaning / Cause:
The maximum number of CompanyLocks per day has been
reached.
Measure:
After the current calendar day has expired, the lock-in can be
executed again.
S203 - - - -
> Input <
“SrvID:S203 see manual”
Meaning / Cause:
The maximum number of CompanyLocks per day has been
reached.
Measure:
After the current calendar day has expired, the lock-in can be
executed again.
S204 - - - -
> Company lock <
“SrvId:204 see manual”
Meaning / Cause:
Function temporarily not executable.
Measure:
Repeat the function after a short break.
S205 - - - -
> Company lock <
“SrvId:205 see manual”
Meaning / Cause:
Unexpected input error during CompanyLock.
Measure:
Repeat the function after a short break.
S206 - - - -
> Input <
“SrvId:S206 see manual”
Meaning / Cause:
Unexpected input error when entering the time.
Measure:
Repeat the function after a short break.
S207 - - - -
> Input <
“SrvId:S207 see manual”
Meaning / Cause:
Unexpected input error when starting the sensor pairing.
Measure:
Repeat the function after a short break.