Bosch Intuvia - Checking the Bell; Checking the Handles; Checking the USB Cover; Checking the Lighting

MY22B01 - 12_1.0_26.08.2021
138
Cleaning and servicing
7.1.10 Checking the bell
1 Press the bell button downwards.
2 Let button spring back.
 If you do not hear a clear, distinct ring of the
bell, replace bell. Contact specialist dealer.
7.1.11 Checking the handles
 Check the handles are firmly in place.
 Screw loose handles firmly into place.
7.1.12 Checking the USB cover
 If featured, check the position of the cover on
the USB port on a regular basis and adjust if
necessary.
7.1.13 Checking the lighting
1 Switch light on.
2 Check that the front and rear lights come on.
 If the front and rear lights do not come on, take
pedelec out of service. Contact specialist
dealer.
7.1.14 Checking the brake
1 Pull both brake levers when stationary.
2 Push the pedals.
 If no resistance is generated in the usual brake
lever position, take pedelec out of service.
Contact specialist dealer.
 If the brake is losing fluid, take pedelec out of
service. Contact specialist dealer.
All manuals and user guides at all-guides.com