MY22B01 - 12_1.0_26.08.2021
23
Description
3.2 Nameplate
The nameplate is situated on the frame. The
precise position of the nameplate is shown in
Figure 2 . The nameplate contains thirteen pieces
of information.
Figure 1: Example ZEG nameplate
No. Designation Description
More
information
1CE marking
The manufacturer uses the CE marking to declare that the pedelec
complies with applicable requirements.
2 Manufacturer's contact details You can contact the manufacturer at the address indicated. Section 1.1
3 Type number
All pedelec models have an eight-digit type number, which is used to
specify the design model year, the type of pedelec and the version.
Section 1.5
4 Maximum continuous power
The maximum continuous power is the greatest possible power for the
electric motor output shaft over 30 minutes.
5 Maximum permitted total weight
The maximum permitted total weight is the weight of the fully assembled
pedelec with the rider plus baggage.
6 Year of manufacture
The year of manufacture is the year in which the pedelec was
manufactured. The production period is between June 2021 and June 2022.
7 Pedelec type
Each pedelec is assigned a pedelec type, which determines its proper use,
function and area of use.
Section 3.2
8 Safety markings Safety markings warn of hazards. Section 2.6
9 Disposal instructions These instructions must be followed when disposing of the pedelec. Section 10
10 Area of use The pedelec may only be ridden in authorised locations. Section 3.6
11 Model year
The model year refers to the first production year that the series-
manufactured pedelec was produced in the version concerned. The year of
manufacture is different to the model year in some cases.
12 Weight of the ready-to-ride pedelec
The weight of the ready-to-ride pedelec is specified as a weight of 25 kg or
above and refers to its weight at the time of purchase. Extra accessories
need to be added to the weight.
Section 4.1
13 Shut-off speed
The speed that the pedelec reaches at the moment when the current has
dropped to zero or to the no-load current value.
Table 10: Explanation of information on the nameplate