Bosch Intuvia - Handlebars; Fork

MY22B01 - 12_1.0_26.08.2021
26
Description
3.3.2.5 Handlebars
The pedelec is steered using the handlebars. The
handlebars are used to support the upper body
and is the mount for most controls and displays
(see Section 3.4.1).
Figure 5: Handlebar dimensions
The main structural dimensions of handlebars are:
1 Rise (height)
2Width
3 Backsweep
3.3.2.6 Fork
The stem and handlebars are attached to the top
end of the fork steerer. The axle is fastened to the
fork ends. The wheel is fastened to the axle.
Figure 6: Overview of fork
1 Fork steerer
2 Side reflectors (optional)
3 Fork end
4 Fork leg
1
2
3
1
2
3
4
All manuals and user guides at all-guides.com