Bosch ISN-SM-30 - Page 20

4
Installation - Accessories
20
Bosch Security Systems Seismic Detectors Application Guide I-200153-1
04.2016
F
igure 4-7: GMXS5 transmission signals
Figure 4-7: GMXS5 transmission signals shows the transmission signals from the GMXS5, which
are strongest closest to the device but still detectable by ISN-SM-xx detectors if the signals are
within the detection radius of the detectors.
F
igure 4-8: Activate 4 detectors from a single GMXS5
Figure 4-8: Activate 4 detectors from a single GMXS5 is a typical example of how to activate multi-
ple detectors from a single GMXS5.