Need help?Do you have a question about the Bosch Junkers miniMAXX WR 11-2 B Series and is the answer not in the manual?
General| Type | Gas Heater |
|---|---|
| Power Output | 19.2 kW |
| Fuel Type | Natural Gas or LPG |
| Dimensions (H x W x D) | 580 x 310 x 220 mm |
| Nominal Heat Output | 19.2 kW |
| Minimum Operating Pressure | 0.2 bar |
| Ignition | Electronic ignition |
| Hot Water Production Rate | 11 liters/min |
| Flue Type | Open flue |
| Model | miniMAXX WR 11-2 B |
| Water Flow Rate | 11 l/min (at ΔT=25°C) |
Details the heater's category, model type, and official approval number.
Explains the coding system used for technical identification of the heater.
Lists all components and accessories provided with the gas heater.
Provides an overview of the heater's key features and operational convenience.
Information on optional accessories, such as conversion kits for different gas types.
Crucial pre-installation steps including gas company checks and pipe system testing.
Requirements for installation location and minimum clearances.
Explains the meaning of various symbols and codes shown on the digital display.
Instructions for inserting new batteries and replacing depleted ones.
Essential precautions and checks before the initial heater startup.
Steps for operating the heater's power switch to turn it on and off.
Details on adjusting natural gas and liquefied gas heater parameters.
Procedures for accessing and adjusting gas pressure settings.
Information on using conversion kits and procedures for different gas types.
Outlines functional checks for heat exchanger, burner, water filter, and injectors.
Steps to follow for safely restarting the heater after maintenance.
Instructions for purging the heater system in case of frost risk.
Details on the probe's function, operation, and essential precautions.
A troubleshooting chart listing common problems, their causes, and solutions.
To Next Page
