en Faults – what to do?
40
--------
A warning signal sounds and button alarm is lit
Press the alarm button. Alarm is switched off.
Appliance door is open. Close the appliance door.
Ventilation openings have been covered. Clear ventilation openings.
Large quantities of fresh food were placed in
the appliance.
Do not exceed max. freezing capacity.
Display flashes, warning signal sounds and button alarm is lit.
Press the alarm button. Alarm is switched off.
Appliance door is open. Close the appliance door.
Ventilation openings have been covered. Clear ventilation openings.
Large quantities of fresh food were placed in
the appliance.
Do not exceed max. freezing capacity.
Display flashes.
The temperature in the freezer compartment
was too warm.
When button alarm has been pressed, the warmest
temperature reached in the freezer compartment is
displayed for 5 seconds. Press the alarm button.
The display stops flashing.
Appliance is not cooling, display and light are lit.
Demo mode switched on. Hold down button alarm for 10 seconds until an
acknowledgement signal sounds. Wait and check
whether the appliance is cooling.
To Next Page
Loading...
