Need help?Do you have a question about the Bosch LTC 2600 Series and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | LTC 2600 Series |
| Category | Multiplexer |
| Language | English |
Connect up to 16 cameras to the BNC inputs for initial setup.
Configure camera output for looping by connecting to a second BNC source if needed.
Connect a monitor to MON A for multiscreen viewing and tape playback.
Connect a second monitor to MON B for additional display needs.
Connect VCR output to the multiplexer's VCR IN port for playback operations.
Synchronize the multiplexer and VCR using VEXT input and VCR ground connections.
Turn on the multiplexer unit after completing initial connections.
Note availability of advanced features like Console, SDA, KB, SVHS, and Fonts on System4 Series.
Explains operation of Full Screen, Quad Screen, and Multiscreen display modes.
Procedures for assigning cameras to display cameos in MULTI or QUAD modes.
Details on Zoom, Freeze, and Alarms/Actions Acknowledge functions.
Guide to system configuration via Quick Setup for time, date, and VCR settings.
Setting the multiplexer's time format, current time, date format, and date.
Automatically sets record lists, sequences, and video loss lists.
Configuring VCR synchronization and recording/playback settings.
Explains the three-digit numeric display for multiplexer control and VCR mode.
Describes the status indicators on the keyboard for camera, VCR, and mode status.
How to select and display a single camera in full screen mode.
How to select and display cameras in quad screen format.
How to select and display cameras using various multiscreen configurations.
Overview of multiplexer commands like Record, Playback, Sequence, and VCR Test Mode.
To Next Page