Bosch Nyon - Page 28

English – 26
The following submenus can be changed via
the<Quick Menu>:
– <Trip Data>
Via this submenu, you can reset all data on the dis-
tance traveled so far to zero.
– <Select Destination>
Via this submenu, you can save your current posi-
tion, return to a saved position, or receive direc-
tions to take you home.
– <Map Zoom>
Via this submenu, you can zoom in or out of a sec-
tion of the map.
– <Brightness>
Via this submenu, a brightness setting can be se-
lected from the following: 25%|50%|75%|
100%|Auto.
– <Design>
Via this submenu, you can select a light or dark
background.
– <eShift> (optional)
Via this submenu, you can set the cadence.
– <Custom Riding Modes> (premium function, can
be obtained from the AppStore or Google Play
Store)
Via this submenu, you can select individual riding
modes.
– <Quick Menu>
Via this submenu, you can leave the <Quick Menu>
again.
Troubleshooting
The eBike's components are continuously and auto-
matically monitored. If a fault is detected, the corre-
sponding fault code will appear on the on-board com-
puter.
The drive may also be switched off automatically de-
pending on what type of fault has occurred. You can
continue riding at any time without assistance from
the drive, but you should have your eBike checked
before completing any more journeys.
u Only have repairs performed by a certified bicy-
cle dealer.
Code Cause Corrective measures
410 One or more buttons of the on-board
computer are disabled.
Check whether any buttons are stuck, e.g. as a result of
dirt finding its way in. Clean the buttons if need be.
414 Operating unit connection problem Have the connections checked
418 One or more buttons on the operating
unit are disabled.
Check whether any buttons are stuck, e.g. as a result of
dirt finding its way in. Clean the buttons if need be.
419 Configuration error Restart the system. If the problem persists, contact your
Bosch eBike dealer.
422 Drive unit connection problem Have the connections checked
423 eBike battery connection problem Have the connections checked
424 Communication problem between
components
Have the connections checked
426 Internal time-out error Restart the system. If the problem persists, contact your
Bosch eBike dealer. With this error, it is not possible to
bring up the wheel circumference in the basic settings
menu or to adjust it.
430 Internal battery of the on-board com-
puter is flat (does not apply to
BUI350)
Charge the on-board computer (in the holder or via the
USB port)
1 270 U20 BN2 | (14.03.2023) Bosch eBike Systems