30 en | Configuration PAVIRO Call Stations
2018.04 | 04 | F01U306899 Bosch Security Systems
7 Configuration
The call stations must be configured via a PC using IRIS-Net as
this is the simplest method, and there are no restrictions. Only
limited programming is possible on the actual call stations
themselves.
Menu
To open the main menu when the call station is in idle status:
Press the ▼ Button, keep it held down, and press the ▲ button at
the same time.
Program
Assignment
Program 01 Volume See section
Main menu,
page 31
Program 02 Volume
:
Program 16 Volume
Date/Time
Set Language
Indicator Test
LCD Contrast
LCD
Brightness
Monitor
Volume
CST Setup Input
Password
See section
Setup menu,
page 34
CST Setup
Menu
CAN Address
CAN Baudrate
CAN
Termination
To Next Page
Loading...
