32 en | Configuration PAVIRO Call Stations
2018.04 | 04 | F01U306899 Bosch Security Systems
Notice!
The zone assignment is immediately accepted in the PAVIRO
system.
The assignment remains valid until the selection buttons are
pressed again.
Pressing the ↵ button takes the user to the Volume submenu,
which is described below:
The volume currently set in the program is displayed. Pressing
the ▲ or ▼ button sets the volume of the program. The volume
level is increased or decreased in 1 dB steps. Pressing and
holding the ▲ or ▼ buttons continuously increases or decreases
the volume.
Notice!
The new volume level is immediately accepted in the PAVIRO
system.
Pressing the ↵ button accepts the setting selected, and returns
the user to the Program menu.
Date/Time
The date and time can be set for the PAVIRO system on the call
stations. The indication of this menu item can be edited in the
CST Setup Menu. Pressing the ↵ button takes the user to the
Date/Time dialog. Pressing the ▲ or ▼ button toggles between
the day, month, year, hours, minutes, and seconds. Use the 0–9
buttons on the call station to input entries. Pressing the ↵
button accepts the setting selected, and returns the user to the
Main Menu.
To Next Page
Loading...
