PAVIRO Call Stations Configuration | en 33
Bosch Security Systems 2018.04 | 04 | F01U306899
Set Language
Pressing the ↵ button takes the user to the Set Language dialog.
In this dialog, the language of the display content can be
selected by pressing the ▲ or ▼ button. Pressing the ↵ button
accepts the language selected, and returns the user to the Main
Menu.
Indicator Test
Pressing the ↵ button activates the indicator test for the call
station and all connected call station extensions. All LEDs flash
during this test and the speaker will be activated. Pressing the ↵
button deactivates the indicator test, and returns the user to the
Main Menu.
LCD Contrast
Pressing the ↵ button takes the user to the LCD Contrast dialog.
In this dialog, the LCD contrast can be adjusted to the viewing
angle by pressing the ▲ or ▼ button. This helps achieve
maximum readability for the respective position. Pressing the ↵
button accepts the contrast setting selected, and returns the
user to the Main Menu.
LCD Brightness
Pressing the ↵ button takes the user to the LCD Brightness
dialog. In this dialog, the display brightness can be adjusted by
pressing the ▲ or ▼ button. Pressing the ↵ button accepts the
brightness selected, and returns the user to the Main Menu.
Monitor Volume
Pressing the ↵ button takes the user to the Monitor Volume
dialog. Pressing the ▲ or ▼ button adjusts the volume level of the
loudspeaker. Pressing the ↵ button accepts the setting selected,
and returns the user to the Main Menu.
CST Setup
Pressing the ↵ button takes the user to the Password dialog.
Use the 0–9 buttons on the call station to input entries.
Passwords are used to activate call station options.
To Next Page
Loading...
