Bosch PAVIRO PVA-15CST - Setup menu

34 en | Configuration PAVIRO Call Stations
2018.04 | 04 | F01U306899 Bosch Security Systems
Notice!
The default password for activation of the CST Setup Menu is
2222. The password can be changed in the IRIS-Net software.
7.2 Setup menu
This section describes the CST Setup Menu of the PAVIRO call
station.
CAN Address
Pressing the ↵ button takes the user to the CAN Address dialog.
Pressing the ▲ or ▼ button sets the required CAN address. The
call station can be assigned a CAN address between 1 and 16.
Pressing the ↵ button accepts the address selected, and returns
the user to the CST Setup Menu.
Notice!
Address 0 (delivery status) disables remote communication
between the call station and the PVA-4CR12 . The call station
does not appear in the system, even though it is physically
connected to the CAN bus. Each CAN address may exist only
once at a PVA-4CR12 . Otherwise, network conflicts may arise.
CAN Baudrate
Pressing the ↵ button takes the user to the CAN Baudrate
dialog. Pressing the ▲ or ▼ button toggles between the available
baud rates. Pressing the ↵ button accepts the setting selected,
and returns the user to the CST Setup Menu.
CAN Termination
Pressing the ↵ button takes the user to the CAN Termination
dialog. Pressing the ▲ or ▼ button activates or deactivates the
termination on this call station. Termination must be activated
on the call station that is connected to the end of the CAN bus.
Pressing the ↵ button accepts the setting selected, and returns
the user to the CST Setup Menu.