42 en | Operation PAVIRO Call Stations
2018.04 | 04 | F01U306899 Bosch Security Systems
Button Announcement mode Menu mode
configuration, these selection
buttons can be used as a
numeric keypad for zone
selection.
ALARM This button (if installed) is
used to start an alarm signal,
which is transmitted to
programmable zones. The
alarm indicator light illuminates
as soon as the alarm is
triggered. Pressing the ESC
button stops the alarm again.
The alarm type is defined
during configuration of the
PAVIRO system.
Key
switch
The Key switch (if installed)
enables or prevents access to
defined buttons. The access
level of the buttons can be
programmed in IRIS-Net.
Call selection
Programmed zones or zone groups can be selected for
announcements:
– Press one or more selection buttons on the call station or
call station extension(s) to select the zone(s) or zone
group(s). The corresponding green indicator light will come
on.
– To disable a zone or zone group that has already been
selected, press the corresponding selection button again.
The relevant green indicator light will go out.
To Next Page
Loading...
