Bosch PAVIRO PVA-1WEOL - Installation

PAVIRO End-of-line supervision
module
Installation | en
5
Bosch Security Systems B.V. 2019-01 | V2 | F01U350870
2 Installation
To install the End-of-line supervision module you have to:
– Mount the module.
– Set the module address.
– Connect the module to the speaker line.
– Connect the module to earth or ground.
– Check the installation.
2
4
3
2
1
Figure2.1: End-of-line supervision module
Item Description
1 DIP switch S1
2 DIP switch S2
3 Status LED
4 Connector (Speaker line + / Speaker line - / Earth)