12 en | System overview PAVIRO Controller
2022-11 | 07 | F01U306900
User manual
Bosch Security Systems
Number Symbol Element Description
– Indicator test: Press this button for
at least three seconds to activate all
indicators. All indicators (LEDs) at
the front panel light up as long as
the button is pressed (“LED test”)
and the internal buzzer is activated.
4 System fault indicator light This indicator lights yellow if a system
fault according EN 54-16 was detected.
5 Voice alarm indicator light This indicator lights red if the controller
is in voice alarm state according EN
54-16.
6 Network indicator light Indicates the Ethernet network status:
– Illuminated green: Successful data
communication to all configured
Ethernet devices has been
established.
– Flashing green: Ethernet connection
to at least one Ethernet device lost.
– Off: No Ethernet connection.
7 Standby indicator light This indicator lights up green when the
device is in standby mode.
8 Power indicator light This indicator lights up green when the
power supply is OK.
To Next Page
Loading...
