EasyManua.ls Logo

Bosch PAVIRO PVA-4CR12 - Control out Hp

Bosch PAVIRO PVA-4CR12
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAVIRO Controller Connection | en 33
Bosch Security Systems
User manual
2022-11 | 07 | F01U306900
6.11.2 CONTROL OUT HP
The lower half of the control port has six freely programmable high power (HP) control
outputs numbered 1 through 6. In inactive mode (Off), these control outputs are open, while
in active mode (On), they are closed to ground. To operate the externally connected elements,
a voltage source is available on the connection V; see also the following diagram.
i
Notice!
The voltage value used as the supply voltage for the controller is always present on the V
output.
!
Caution!
The maximum permissible power on the V output is 200mA.
Figure6.14: Sample application of a high power control output (LED with series resistor)

Related product manuals