PAVIRO Call Stations Configuration | en 35
Bosch Security Systems 2018.04 | 04 | F01U306899
Firmware Version
Displays the version of the call station firmware.
Buzzer On/Off
The built-in loudspeaker can be programmed as an acoustic
warning signal. The signal tone sounds in the event of incorrect
operation or malfunction, or as a warning. Pressing the ↵ button
takes the user to the Buzzer dialog. The current setting of the
buzzer ("on" or "off") is displayed. Pressing the ▲ or ▼ buttons
toggles between these two statuses. Pressing the ↵ button
accepts the setting selected, and returns the user to the CST
Setup Menu.
Prechime
A prechime can be programmed for announcements. In
announcement mode, the prechime is transmitted to the
selected zones/groups each time the ↵ button is pressed. The
announcement can begin during the prechime, meaning that the
announcer can "interrupt" the prechime. Pressing the ↵ button
takes the user to the Prechime dialog. The current setting of the
prechime ("on" or "off") is displayed. Pressing the ▲ or ▼ buttons
toggles between these two statuses. Pressing the ↵ button
accepts the setting selected, and returns the user to the CST
Setup Menu.
Compressor On/Off
Pressing the ↵ button takes the user to the Compressor On/Off
dialog. Pressing the ▲ or ▼ button activates or deactivates the
microphone signal compressor. Pressing the ↵ button accepts
the setting selected, and returns the user to the CST Setup
Menu.
Show Date & Time
Pressing the ↵ button takes the user to the Show Date & Time
dialog. Pressing the ▲ or ▼ button activates or deactivates the
indication of the Date/Time menu item in the menu. Pressing the
↵ button accepts the setting selected, and returns the user to
the CST Setup Menu.
To Next Page
Loading...
