To Next PageTo Next Page
Need help?Do you have a question about the Bosch PBD 40 and is the answer not in the manual?
Basic safety precautions for fire, electric shock, and personal injury.
Keeping work area safe and ensuring electrical safety measures.
Staying alert, using PPE, and preventing accidental starts.
Proper use, care, and servicing of power tools.
Guidelines for laser usage, aiming, and staring to prevent eye damage.
Covers fastening, cleaning, speed, workpiece handling, and chip removal.
Includes cable checks, safe storage, and product-specific electrical safety.
Explains warning symbols and their meanings for safe operation.
Explanation of symbols like safety goggles and disposal icons.
Identification of machine components and their numbering.
Details on intended use and noise/vibration data.
Article number, power, speed, dimensions, weight, and safety class.
Statement of compliance with EU directives and standards.
Steps for assembly, securing to workbench, and pre-assembly checks.
Procedures for dust extraction and ventilation during use.
Steps for changing drill bits in the keyless chuck.
Using laser cross and clamping device for precise setup.
Guidance on setting the vertical position of the motor unit.
Procedures for power control, restart protection, and overload shutdown.
Using gear selection and electronic control to set speed.
General drilling best practices and specific guidance for metal.
Safe positioning and initial drilling steps, workpiece setup.
Indicating and adjusting drilling depth using depth stop.
Safe transport and routine maintenance/cleaning procedures.
Adjusting motor unit brake and customer assistance contact.
Instructions for recycling and EC country requirements.
Contact details for Ireland, Australia, New Zealand, and South Africa.
Basic safety precautions for fire, electric shock, and personal injury.
Keeping work area safe and ensuring electrical safety measures.
Staying alert, using PPE, and preventing accidental starts.
Proper use, care, and servicing of power tools.
Guidelines for laser usage, aiming, and staring to prevent eye damage.
Covers fastening, cleaning, speed, workpiece handling, and chip removal.
Includes cable checks, safe storage, and product-specific electrical safety.
Explains warning symbols and their meanings for safe operation.
Explanation of symbols like safety goggles and disposal icons.
Identification of machine components and their numbering.
Details on intended use and noise/vibration data.
Article number, power, speed, dimensions, weight, and safety class.
Statement of compliance with EU directives and standards.
Steps for assembly, securing to workbench, and pre-assembly checks.
Procedures for dust extraction and ventilation during use.
Steps for changing drill bits in the keyless chuck.
Using laser cross and clamping device for precise setup.
Guidance on setting the vertical position of the motor unit.
Procedures for power control, restart protection, and overload shutdown.
Using gear selection and electronic control to set speed.
General drilling best practices and specific guidance for metal.
Safe positioning and initial drilling steps, workpiece setup.
Indicating and adjusting drilling depth using depth stop.
Safe transport and routine maintenance/cleaning procedures.
Adjusting motor unit brake and customer assistance contact.
Instructions for recycling and EC country requirements.
Contact details for Ireland, Australia, New Zealand, and South Africa.
The Bosch PBD 40 is a versatile drill press designed for precision drilling in various materials such as wood, metal, and plastic. It is built to ensure safe and efficient operation, offering a range of features that enhance user control and accuracy.
The PBD 40 operates by guiding an application tool (drill bit) into a workpiece, allowing for precise hole creation. The motor unit, which houses the keyless chuck, moves vertically along a drilling column, enabling adjustment of the drilling depth. The machine features two speed ranges, selectable via a gear selector, to accommodate different drilling diameters and materials. The electronic speed control allows for variable adjustment of the drilling speed, which is displayed on an integrated screen.
A notable feature is the integrated laser unit, which projects a cross onto the workpiece, indicating the exact drilling location. This helps users align their marks accurately before drilling. The machine also includes an illumination unit to provide sufficient lighting for the direct working area, further enhancing visibility and precision.
The PBD 40 incorporates a Quick-Stop function, allowing for swift shutdown of the machine, particularly useful if the application tool jams or locks up in the workpiece. It also has a restarting protection mechanism that prevents uncontrolled starting after a power failure, ensuring user safety. The temperature-dependent overload protection feature automatically switches off the machine if it experiences excessive loading or operating temperatures, protecting the electronics and extending the tool's lifespan.
Before operation, the PBD 40 must be securely mounted on a firm, level, and horizontal surface, such as a workbench, using suitable screw fasteners. This prevents the machine from slipping or wobbling during use, ensuring stable and accurate drilling. The quick-clamping device, along with the parallel guide, allows for firm clamping of workpieces, preventing them from turning during drilling. For smaller workpieces, a machine vice (accessory) can be used.
Users can adjust the height of the motor unit to suit the length of the application tool and the size of the workpiece. This adjustment is performed using a handwheel and a clamping lever, with a brake mechanism preventing accidental lowering of the motor unit. The machine's display provides real-time information, including the set speed and the drilling depth. The drilling depth can be precisely indicated and set using a depth stop and a zero-point button, allowing for repetitive drilling to a specific depth.
When operating, it's crucial to select the correct speed based on the drill bit diameter and the material being drilled. The machine provides a speed diagram to guide users in setting the appropriate rpm for steel and aluminum. The application tool should only be guided toward the workpiece when the machine is switched on to prevent jamming. For drilling in metal, center-punching the workpiece and pilot-drilling for diameters exceeding 10 mm are recommended practices. Using cutting oil can also improve drilling performance and cool the drill bit.
Regular maintenance is essential for the safe and proper functioning of the PBD 40. Before any maintenance work, the power plug must be disconnected from the mains supply to prevent unintentional starting. The machine and its ventilation slots should be kept clean. The drilling column should be periodically cleaned with a dry cloth and a light coat of Bosch universal cutting oil to ensure smooth operation.
The clamping force of the brake for the motor unit can be readjusted if needed. This involves turning two set screws with the supplied Allen key to either reduce or increase the clamping force, followed by checking that the motor unit is securely held in any position.
In case of damage, particularly to the supply cord or protective devices, repairs should only be carried out by an authorized Bosch customer service agent. This ensures that the safety of the power tool is maintained and that identical replacement parts are used. The machine should be stored in a dry and lockable location when not in use to prevent damage and unauthorized operation. When transporting the machine, it should always be carried by the base plate, and ideally by two persons to avoid back injuries.
General| Chuck type | Keyless |
|---|---|
| Screwdriving | - |
| Hammer drilling | No |
| Adjustable speed | Yes |
| Number of gears | 2 |
| Chuck capacity (max) | - mm |
| Screw diameter (max) | 90 mm |
| Idle speed (1st gear) | 850 RPM |
| Idle speed (2nd gear) | 2500 RPM |
| Drilling diameter in wood (max) | 40 mm |
| Drilling diameter in steel (max) | 13 mm |
| Type | Drill |
| Input power | 710 W |
| Power source | AC |
| AC input voltage | 230 V |
Weight and Dimensions| Weight | 11200 g |
|---|
