11
Measured values determined according to EN 50 144.
The A-weighted noise levels of the tool are typically:
Sound pressure level: 86 dB(A)
Sound power level: 99 dB(A)
Wear ear protection!
The typical weighted acceleration is 10 m/s
2
.
The machine is intended for hammer drilling in
concrete, brick and stone. It is likewise suitable for
drilling without impact in wood, metal, ceramic and
plastic.
Machines with electronic control and right / left
rotation are also suitable for screw driving and thread
cutting.
1 13 mm Quick clamping replacement drill chuck
(PBH 240 RE)
2 SDS-plus replacement drill chuck (PBH 240 RE)
3 Tool holder (SDS-plus)
4 Dust protection cap
5 Locking sleeve
6 Replacement drill chuck locking ring
(PBH 240 RE)
7 Depth stop
8 Drill bit holder*
9 Auxiliary handle
10 Operational mode selection switch
11 Unlocking button
12 Right/Left rotation switch
13 Speed control
14 On/Off switch
15 Locking button
* Optional accessory
Not all the accessories illustrated or described are
included in standard delivery.
Product Specifications
Percussion drill PBH 220 RE PBH 240 RE
Order number 0 603 336 7.. 0 603 326 7..
Replacement drill chuck – ●
Speed control ● ●
Speed preselection ●●
Right/Left rotation ● ●
Rated input power [W] 600 620
Power output [W] 300 310
Impact rate [per min] 0 ... 4400 0 ... 4600
Impact energy per stroke [J] 0 ... 2.0 0 ... 2.2
Nominal speed [RPM] 0 ... 800 0 ... 840
Tool holder SDS-plus ● ●
Spindle collar diameter [mm] 43 (Euro-Standard) 43 (Euro-Standard)
Number of chiselling positions 36 36
Maximum drill diameter:
Concrete
Granite
Wood
Steel
[mm]
[mm]
[mm]
[mm]
22
16
30
13
24
16
30
13
Weight (without accessories) approx. [kg] 2.7 2.8
Degree of protection / II / II
Noise/Vibration Information
Intended Use
Product Elements
pbh220_bu_1609929B38_t.fm5 Seite 12 Montag, 19. April 1999 3:07 15
To Next Page
Loading...
