Bosch Performance Line Original Operating Instructions

140
English – 6
Number Troubleshooting
514002
tect the magnetic field. See whether you
have lost the magnet while riding.
If you are using a magnet sensor, check that
the sensor and magnet have been properly
installed. Make sure too that the cable to the
sensor is not damaged.
If you are using a rim magnet, make sure that
you do not have any magnetic field interfer-
ence in the vicinity of the drive unit.
514003
514006
Critical errors
Critical errors are shown by the assistance level LED(5) and
the battery charge indicator of the eBike battery(3) flashing
red. Follow the instructions in the table below if a critical er-
ror occurs.
Number Instructions
660002
Please do not charge your battery and do
not continue to use it.
Please contact your specialist dealer.
6A0004
Remove the PowerMore battery and restart
your eBike.
If the problem persists, please contact your
specialist dealer.
890000
– Acknowledge the error code.
– Restart the eBike system.
If the problem persists:
– Acknowledge the error code.
– Perform software update.
– Restart the eBike system.
If the problem persists:
– Please contact a Bosch eBike Systems
specialist dealer.
Maintenance and servicing
Maintenance and cleaning
The operating unit must not be cleaned with pressurised wa-
ter.
Keep the operating unit clean. Dirt can cause faulty bright-
ness detection.
Clean your operating unit using a soft cloth dampened only
with water. Do not use cleaning products of any kind.
u Have all repairs performed only by an authorised bike
dealer.
After-sales service and advice on using products
If you have any questions about the eBike and its compon-
ents, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com
.
Disposal and substances in products
You can find information about substances in products at the
following link:
www.bosch-ebike.com/en/material-compliance
.
Do not dispose of eBikes and their components with house-
hold waste.
The drive unit, on-board computer incl. operat-
ing unit, eBike battery, speed sensor, accessor-
ies and packaging should be disposed of in an
environmentally correct manner.
Check that your personal data has been deleted from the
device.
Batteries that can be removed from the power tool without
destruction must be removed before disposal itself and sor-
ted for separate battery collection.
In accordance with Directive 2012/19/EU
and Directive 2006/66/EC respectively, elec-
tronic devices that are no longer usable and de-
fective/drained batteries must be collected
separately and recycled in an environmentally
friendly manner.
Electrical and electronic equipment are collected separately
for pre-sorting by type and helps to ensure that raw materi-
als are treated and recovered properly, thereby protecting
people and the environment.
Please return Bosch eBike components that are no longer
usable free of charge to an authorised bicycle dealer or to a
recycling facility.
Subject to change without notice.
0 275 007 3RL | (21.02.2023) Bosch eBike Systems
TA-2022/2995
APPROVED

Bosch Performance Line Specifications

General

Motor Type	Mid-drive
Drive Unit Weight	3.2 kg
Nominal Power	250 W
Walk Assistance	Yes
Battery Voltage	36 V
Max Speed	25 km/h (EU), 20 mph (US)
Assistance Levels	Eco, Tour, Sport, Turbo
Display	Intuvia, Nyon, Purion, Kiox
Compatibility	Bosch eBike systems