Bosch PIV81RHB1E - Powerboost

PowerBoost en
11
‒ You can set intermediate values between 1
minute and 9 minutes in increments of 30
seconds. To do this, use to select the intermedi-
ate values.
‒ To select a time in hours, e.g. 1h 30mins, press
the numerical sequence 1 - 3 - 0 in the settings
area. If you select a time of more than
60minutes, the time is automatically displayed in
hours.
4.
Touch to confirm.
a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds.
Changing or switching off Switch-off timer
1.
Select the cooking zone and then touch ⁠.
2.
To switch off the function, change the cooking time
or set it to ⁠.
10.2 Timer
Enables a clock to be activated. This function operates
independently of the cooking zones and other settings.
It does not automatically switch off the cooking zones.
Switching on Timer
Requirement:Assign the function to ⁠.
1.
Press ⁠.
2.
Select the required time.
a The time starts to elapse.
a A signal tone sounds and the displays flash once
the time has elapsed.
Changing or switching off the Timer
1.
Press ⁠.
2.
To switch off the function, change the cooking time
or set it to ⁠.
PowerBoost
11 PowerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using ⁠.
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, ⁠and ⁠ flash on the display for
the selected cooking zone. ⁠is then set automatically
without activating the function.
11.1 Switching on PowerBoost
1.
Select the cooking zone.
2.
Touch
a The ⁠display lights up.
a The function is activated.
11.2 Switching off PowerBoost
1.
Select the cooking zone.
2.
Touch .
a The ⁠display goes out and the cooking zone
switches back to power level
a The function is switched off.
Note:In certain circumstances, the appliance switches
this function off to protect the electronic elements in-
side the hob.
PanBoost
12 PanBoost
1
You can use this function to heat up pans more quickly
than with . Do not use the PowerBoost function with
frying pans – this may damage the coating.
You can activate the function via Home Connect or Fa-
vourite button.
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, ⁠and flash on the display for
the selected cooking zone. then switches on auto-
matically.
12.1 Recommended applications
¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating
up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use
pans with a thin base.
12.2 Switching on PanBoost
Requirement:Assign the function to .
→"Favourite button", Page10.
1.
Select the cooking zone.
2.
Touch ⁠.
a lights up.
a The function is activated.
1
Available depending on software version. Further information on availability can be found on the website.