Plena Voice Alarm System Connection | en 53
Bosch Security Systems B.V. Installation and Operation manual 9922 141 1037x (V2.16) | V0.6 | 2011.09
5.1.10 BGM inputs
The voice alarm controller has 2 BGM inputs (see Figure 5.14 and Table 5.1). Each BGM input
has a double cinch socket. To these cinch outputs, a background music source can be
connected (e.g. a PLN-DVDT Plena DVD Tuner). The signals connected to the L (left) and R
(right) cinch sockets are mixed to form a single input signal.
Figure 5.14 BGM inputs
Table 5.1 BGM inputs
5.1.11 Status output contacts
The voice alarm controller has 3 status output contacts to indicate the current system state
(see Figure 5.15). These are used to send the status of the Plena Voice Alarm System to third
party equipment or to connect sounders or similar indicating devices.
Figure 5.15 Status output contacts (default)
Input Source
CD/Tuner CD or tuner
AUX Auxiliary source
AUX
In
CD/Tuner
To Next Page
Loading...
