Plena Voice Alarm System Operation | en 75
Bosch Security Systems B.V. Installation and Operation manual 9922 141 1037x (V2.16) | V0.6 | 2011.09
7.2 Background music
The background music (BGM) is controlled using the BGM controls on the front of the voice
alarm controller, voice alarm router and their remote control and remote control extensions.
Proceed as follows to route BGM:
1. Select the BGM source (see section 7.2.1 ).
2. Select the zones (see section 7.2.2 ).
7.2.1 Select BGM source
Select the BGM source with the Select button on the front of the voice alarm controller (see
Figure 7.3). A green LED indicates the source that is selected.
– If the source is a CD player or a tuner that is connected to the CD/Tuner input, choose
CD/Tuner.
– If the source is an auxiliary source that is connected to the Aux input, choose Aux.
Figure 7.3 BGM source selector
7.2.2 Select zones
The BGM is distributed to the zones with the Zone select buttons on the voice alarm
controller (see Figure 7.4), voice alarm router, remote controls and remote control
extensions. A green LED indicates the zones to which BGM is distributed.
– If the Zone select indicator is off, no BGM is distributed to the zone. Push the Zone select
button to distribute the BGM to the zone.
– If the Zone select indicator is on, BGM is distributed to the zone. Push the Zone select
button to stop distributing the BGM to the zone.
Figure 7.4 BGM zone selector
To Next Page
Loading...
