Bosch Plena - Delete Zone Groups; Rename Zone Groups

Bosch Security Systems | 2005-10 | 9922 141 10384 en
Plena Voice Alarm System | Software Manual | Zones en | 17
4.3.3 Delete zone groups
Proceed as follows:
1 Select the zone group that must be deleted from the
Name drop-down list in the Zone Group block.
2 Click the Delete button to delete the zone group.
4.3.4 Rename zone groups
Proceeds as follows:
1 Select the zone group that must be renamed from the
Name drop-down list in the Zone Group block (e.g.
Floors).
2 Click the Rename button. A window similar to the
one in figure 4.5 appears.
3 Enter the new name of the zone group in the text
box (e.g. Visitors’ wing) and push the OK button. The
window disappears and the new name of the zone
group is displayed in the Zones window (see figure
4.6 for an example).
4Click the Save button to save the changes.
Note
The zones themselves are not deleted from the
system.
figure 4.5: Rename zone group, step 2
figure 4.6: Rename zone group, step 3