Bosch Plena - Delete Messages; Rename Messages

Bosch Security Systems | 2005-10 | 9922 141 10384 en
Plena Voice Alarm System | Software Manual | Messages en | 32
6.5.6 Delete messages
Proceed as follows:
1 Select the message that must be deleted from the
Name drop-down list.
2 Click the Delete button.
6.5.7 Rename messages
Proceed as follows:
1 Select the message that must be renamed from the
Name drop-down list.
2 Click the Rename button. A window similar to the
one in figure 6.21 appears.
3 Enter the new name of the message in the text box
(e.g. Commercials) and push the OK button. The
window disappears and the new name is displayed in
the Edit messages window (see figure 6.22 for an
example).
4Click the Save button to save the changes.
Caution
Not not change the name of a message after
you have completed the action programming.
The message can be deleted.
figure 6.21: Rename message, step 2
figure 6.22: Rename message, step 3