Bosch Plena - Keypad

Bosch Security Systems | 2005-10 | 9922 141 10384 en
Plena Voice Alarm System | Software Manual | Action Programming en | 38
4 Assign zones to the zone selection buttons of the call
station with the Select zones drop-down lists (see
figure 7.11).
5 Click the Save button to save the changes.
7. 4 . 3 K ey p a d
See figure 7.12 for an overview of the Keypad tab.
Proceed as follows:
1 Assign zones to the zone selection buttons of the call
station keypad with the Select zones drop-down lists
(see figure 7.11).
2Click the Save button to save the changes.
figure 7.11: Call station, buttons
Note
The remaining zone selection button on the call
station selects all zones that are assigned to the
other zones selection buttons.
Plena
1
2
3
4
5
6
figure 7.12: Keypad
figure 7.13: Call station, buttons
Plena
1
2
3
4
5
6
7