Bosch Plena - Installation Procedures; Installing the Voice Alarm Controller; Installing the Voice Alarm Router

Bosch Security Systems | 2005-10 | 9922 141 10384 en
Plena Voice Alarm System | Software Manual | Action Programming en | 43
9 Modify password
9.1 Overview
Passwords can be changed for both software and
hardware. Passwords have these criteria:
• Contain at least four numbers or letters.
• The letters are case sensitive.
• Special characters are allowed eg @!%.
• The default password set by the factory is
12345678.
9.1.1 Change password
1Select Modify password from the Main Menu.
2Select Modify software password to change the
software password.
3Select Modify hardware password to change the
password of the hardware system.
4 Type the existing password in the Enter current
password field. Click OK.
5 Type the new password in the New password field.
6 Retype the new password in the Confirm password
field.
7 Click OK.
figure 9.1Change password dialog box