Bosch PLR 40 C - Selecting the Reference Level; Measuring Functions

20 | English
The reception lens(12) and the laser beam output(13) must not be covered dur-
ing the measuring process.
Selecting the Reference Level
For the measurement, you can select from various reference levels:
The rear edge of the measuring tool (e.g. when placing against walls)
The front edge of the measuring tool (e.g. when measuring from a table edge)
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals
Measuring functions
Selecting/Changing Measuring Function
You will find the following functions in the Functions menu:
–
Length measurement
–
Area measurement
–
Volume measurement
–
Continuous measurement
Press the button as many times as needed for the in-
dicator for the required function to appear in the
display(5).
To confirm the selection, press the button.
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals
1 609 92A 6KX | (24.06.2021) Bosch Power Tools