14 | English
1 609 92A 214 | (10.11.15) Bosch Power Tools
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Assembly
Changing the Tool
Before any work on the machine itself, pull the mains
plug.
Wear protective gloves when changing application
tools/accessories. Contact with the application tool/ac-
cessory can lead to injuries.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Accessory Material Application
BIM segment saw
blade
Wooden materials, plas-
tic, non-ferrous metals
Separating and plunge cuts; also for sawing close to edges,
in corners and hard to reach areas;
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
Base plate for sand-
ing, series Delta
93 mm
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to reach
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
HCS plunge cut saw
blade, wood
Wooden materials, soft
plastics
Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
HCS plunge cut saw
blades, wood
Wooden materials, soft
plastics
Smaller separating and plunge cuts;
example: cut-outs in furniture for cable connections
BIM plunge cut saw
blades, metal
Metal (e. g. unhardened
nails, screws, smaller pro-
files), non-ferrous metals
Smaller separating and plunge cuts;
example: shortening narrow profiles, cutting fastening
elements such as staples
HM-Riff segment
saw blade
Grouting joints, soft wall
tiles, glass-fibre reinforces
plastic and other abrasive
materials
Cutting and separating close to edges, in corners or hard to
reach areas;
example: removing grouting joints between wall tiles for
repair work, cutting openings in tiles, gypsum boards or
plastic
HM-Riff delta plate
Mortar, concrete remain-
ders, wood, abrasive ma-
terials
Rasping and sanding on hard surfaces;
example: removing mortar or tile adhesive (e.g. when
replacing damaged tiles)
Scraper, rigid
Carpets, coverings Scraping on hard surfaces;
example: removing carpet and tile adhesive
BIM serrated seg-
ment saw blade
Insulation material, insula-
tion panels, floor panels,
sound insulation panels,
cardboard, carpet, rub-
ber, leather
Cutting soft materials
OBJ_BUCH-345-012.book Page 14 Tuesday, November 10, 2015 5:54 PM
To Next Page
Loading...
