PRAESENSA General installation procedures and instructions | en 21
Bosch Security Systems B.V. Installation manual 2019.11 | V1.00 |
As long as the equipment rack is well ventilated, all devices can be stacked with no extra
space between them. Make sure the temperature inside the rack cannot exceed +50°C
(+122°F).
– Mounting brackets are used to mount the device in 19”‑equipment racks.
– Ventilation inlets should be kept free of obstacles and dust. Fans are controlling the
airflow based on internal temperature. Airflow is from the front to the rear and sides.
– Integrated handles make it easy to maneuver the device, without adding to the installation
depth.
– Sliding feet prevent making scratches on the surface the device is positioned on.
– Product labels are on the side or rear of each device.
Notice!
Make pictures of the product labels and make sure the hostnames and MAC‑addresses are
readable, or make a list of all hostnames and MAC‑addresses of the devices before mounting
them in the rack. This information is needed for configuration later. After mounting, access to
the product labels with this information might be difficult, especially for devices that have
their labels on the side.
The mechanical construction of all 19"‑devices is rigid enough to mount the devices using only
the holes in the mounting brackets to secure them in the rack. It is however considered good
practice to mount support rails if the system is installed in a moving environment.
To Next Page
Loading...
