Bosch Professional D-tect 200 C - Page 6

3. Updating
The update process starts automatically and
takes a few minutes
▶
The tool indicates when the installation of the
update was successfully completed
▶
4. Start working with your updated D-tect 200 C
Turn off the device and remove the SD card
▶
Delete the update file from the SD card
Enjoy working with your updated D-tect 200 C!
▶
▶
The D-tect 200 C will perform a restart during the
update process
Please be aware:
Make sure the batteries of your D-tect 200 C are
fully charged
▶
Put the SD card with the update file into the
D-tect 200 C. Then, turn on the device
▶
6