To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GDS 18V-300 and is the answer not in the manual?
General| Battery Voltage | 18 V |
|---|---|
| Max Torque | 300 Nm |
| Tool Holder | 1/2'' Square |
| Weight excl. battery | 1.3 kg |
| Screw diameter | M 10 – M 18 |
| Battery Type | Li-ion |
| No-load Speed | 0-2, 400 rpm |
| Impact rate | 0-3, 400 bpm |
Read all safety warnings, instructions, illustrations, and specifications provided with this power tool.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not force the power tool. Use the correct power tool for your application.
Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Hold the power tool by insulated gripping surfaces when performing an operation where the fastener may contact hidden wiring.
The machine is intended for driving in and loosening screws and bolts as well as for tightening and loosening nuts.
The numbering of the product features refers to the diagram of the power tool on the graphics page.
Instructions on how to safely remove the battery pack from the power tool.
Explains how to check the battery's state of charge using LED indicators.
Instructions on how to safely change the application tool (e.g., socket) on the tool holder.
Describes the basic working principle of the tool, including the impact mechanism.
Explains the function of the Automatic Bolt Release (ABR) feature and how to activate/deactivate it.
Covers inserting the battery and setting the rotational direction before starting the tool.
Details how to set the tool's rotation direction for driving or loosening screws and nuts.
Instructions on how to start and stop the power tool using the switch.
Explains how to adjust the tool's rotational speed by varying the trigger pressure.
