Bosch Professional GDX 18V-210 C - Page 17

English | 17
Cordless Impact Wrench GDR 18V-210 C GDX 18V-210 C GDS 18V-210 C
Impact rate
A)
– Setting 1 min
-1
0–2 200 0–2 200 0–2 200
– Setting 2 min
-1
0–3 300 0–3 100 0–3 300
– Setting 3 min
-1
0–4 100 0–4 100 0–4 100
Torque
A)
– Setting 1 Nm 80 130 90
– Setting 2 Nm 160 160 160
– Setting 3 Nm 210 210 210
Max. torque
A)
Nm 210 210 210
Max. breakaway torque
A)
Nm – 370 370
Machine screw diameter mm M6–M16 M6–M16 M6–M16
Tool holder ¼"internal hexagon ¼"internal hexagon/
 ½"
 ½"
Weight according to
EPTA-Procedure 01:2014
B)
kg
1.4–2.5 1.5–2.6 1.4–2.5
Recommended ambient temperat-
ure during charging
°C 0 to +35 0 to +35 0 to +35
Permitted ambient temperature dur-
ing operation and during storage
°C –20 to +50 –20 to +50 –20 to +50
Recommended rechargeable batter-
ies
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
Data transfer
Bluetooth®
C)
Bluetooth® 4.1
(Low Energy)
Bluetooth® 4.1
(Low Energy)
Bluetooth® 4.1
(Low Energy)
Signal interval s 8 8 8
Max. signal range
D)
m 30 30 30
A)
Measured at 20−25°C with rechargeable batteryProCORE18V 8.0Ah.
B)
Measured withGBA 18V 1.5Ah and GBA 18V 12 Ah.
C) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/vibration information
GDR 18V-210 C / GDX 18V-210 C:
Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96dB(A); sound power level
107dB(A). Uncertainty K=3dB.
Wear hearing protection!
GDS 18V-210 C:
Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 97dB(A); sound power level
108dB(A). Uncertainty K=3dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty
K determined according to EN62841-2-2:
Impact tightening of fasteners of the maximum capacity of
the tool:
GDR 18V-210 C: a
h
=10 m/s
2
, K=1.5 m/s
2
GDX 18V-210 C: a
h
=9 m/s
2
, K=1.5 m/s
2
GDS 18V-210 C: a
h
=12.5 m/s
2
, K=1.5 m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
Bosch Power Tools 1 609 92A 5TB | (06.05.2021)