Bosch Professional GLM 50-23 G - Memory and Calculation Features; Memory Value Display and Deletion; Adding and Subtracting Values

26 | English
Memory value display
The value or end result of each completed measurement is automatically saved.
Maximum 30values (measured values or end results) can be retrieved.
Select the memory function [ ].
430.16 m
8.890 m
3
7.620 m
m6.350
4
The number of the memory value is shown at the top of the display,
the corresponding memory value is shown at the bottom and the cor-
responding measuring function is shown on the left.
Press the [+] button(6) to browse forwards through the saved val-
ues.
Press the [–] button(3) to browse backwards through the saved val-
ues.
The oldest value is located in position 1 in the memory, while the newest value is in posi-
tion 30 (when 30 memory values are available). If a further value is saved, the oldest
value in the memory is always deleted.
Deleting the memory
To delete an individual memory value, select this value(see "Memory value display",
page26). To delete, first press the on/off/back button (8) [ ] and confirm this by
pressing the (2) [Func] button.
To delete all the contents of the memory, press the (7) [ ] button and select the
function. Then press the (6) [+] button and confirm this by pressing the (2) [Func] but-
ton.
Adding/subtracting values
Measured values or end results can be added or subtracted.
Adding values
The following example describes the addition of areas:
Measure an area as described in the "Area measurement" section (see "Area measure-
ment", page22).
143.45 m
2
2
+93.406
m50.039
0.0°
m
2
Press the [+] button(6). The calculated area and the + symbol will be
displayed.
Press the measuring button(5)[ ] to start another area measure-
ment. Measure the area as described in the "Area measurement" sec-
tion (see "Area measurement", page22). Once the second measure-
ment is completed, the result of the second area measurement is dis-
played below. To show the end result, press the measuring button(5) [ ] once more.
Note: In the case of a length measurement, the end result is displayed immediately.
1 609 92A 62A | (21.12.2020) Bosch Power Tools