26 | English
The measuring tool continuously measures the distance to the start-
ing point. The defined length and the current measured value are
thereby displayed. The lower or upper arrow displays the shortest
distance to the next or last marking.
The left factor specifies how many times the defined length has
already been reached. A green measured value indicates that a length
has been reached for marking purposes.
A blue measured value indicates the actual value when the reference
value is outside the display.
Grade measurement/digital spirit level
Select the inclination measurement/digital spirit level .
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination exceeds 3°, the ball in the display lights up red.
Grade measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level
for grade measurement.
Memory value display
The value or end result of each completed measurement is automatically saved.
Maximum 30values (measured values or end results) can be retrieved.
Select the memory function [ ].
430.16 m
8.890 m
3
7.620 m
m6.350
4
The number of the memory value is shown at the top of the display,
the corresponding memory value is shown at the bottom and the cor-
responding measuring function is shown on the left.
Press the [+] button(6) to browse forwards through the saved val-
ues.
Press the [–] button(3) to browse backwards through the saved val-
ues.
1 609 92A 5YM | (19.01.2021) Bosch Power Tools
To Next Page
Loading...
