20 | English
The measuring tool continuously measures the distance to the start-
ing point. The defined length and the current measured value are
thereby displayed. The lower or upper arrow displays the shortest
distance to the next or last marking.
Note: When measuring continuously, you can set a measured value
as a defined length by pressing the button (4).
The left factor specifies how many times the defined length has
already been reached. The green arrows on either side of the display
indicate the reaching of a length for marking purposes.
Red arrows or red text indicate the actual value when the reference is
outside of the display.
Grade measurement/digital spirit level
Select the inclination measurement/digital spirit level .
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination exceeds 3°, the ball in the display lights up red.
Inclination measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level
for inclination measurement. If the display flashes during measure-
ment, the measuring tool has been tipped too heavily to the side.
Memory functions
The value or end result of each completed measurement is automatically saved.
Memory value display
Maximum 30values (measured values or end results) can be retrieved.
Select the memory function .
430.16 m
8.890 m
3
7.620 m
m6.350
4
The number of the memory value is shown at the top of the display,
the corresponding memory value is shown at the bottom, and the cor-
responding measuring function is shown on the left.
Press the (3)[+] button to browse forwards through the saved val-
ues.
1 609 92A 5E3 | (30.03.2020) Bosch Power Tools
To Next Page
Loading...
