English | 11
Bosch Power Tools 1 609 92A 30M | (25.7.16)
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Technical Data
The technical data of the machine are listed in the table on
page 153.
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 153.
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-2.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Maintenance and Cleaning
For safe and proper working, always keep the machine
and ventilation slots clean.
Clean the application tool, the tool holder, the power tool’s
ventilations slots, and the battery’s ventilation slots each time
after using.
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Action Figure Page
Removing the battery
1 154
Inserting the battery
2 154
Mounting application tools
3 154/155
Reversing the rotational direction
4 155
Setting the torque
5 156
Selecting the drilling position
6 156
Gear selection, mechanical
7 156
Mounting/dismounting the belt hook
8 157
Mounting/dismounting the bit holder
9 157
Mounting/dismounting the belt hook
and bit holder 10 157
Mounting/dismounting the colour clip
11 158
Switching On and Off
12 158
Checking the battery charge condition
13 158
Selecting Accessories
– 159
OBJ_BUCH-2899-001.book Page 11 Monday, July 25, 2016 1:14 PM
To Next Page
Loading...
