18 | English
2 609 004 467 | (21.1.10) Bosch Power Tools
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 89 dB(A);
Sound power level 100 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a
h
<2.5 m/s
2
, Uncertainty K =1.5 m/s
2
,
Impact drilling into concrete: Vibration emission
value a
h
=18 m/s
2
, Uncertainty K =1.5 m/s
2
,
Screwdriving without impact: Vibration emis-
sion value a
h
<2.5 m/s
2
, Uncertainty
K=1.5m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Combination Cordless Drill PSB 14,4 LI-2 PSB 18 LI-2
Article number
3 603 J58 4.. 3 603 J58 3..
Rated voltage
V= 14.4 18
No-load speed
– 1st gear
– 2nd gear
min
-1
min
-1
0–350
0–1550
0 – 400
0 – 1650
Max. torque for hard/soft screwdriving application
according to ISO 5393
Nm 40/23 48/30
Max. screw dia.
mm 8 8
Max. drilling dia.
– Steel
– Wood
– Brickwork
–Concrete
mm
mm
mm
mm
13
30
14
10
13
35
15
10
Chuck clamping range
mm 0 – 10 0–10
Weight according to EPTA-Procedure 01/2003
kg 1.7 1.8
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
OBJ_BUCH-870-003.book Page 18 Thursday, January 21, 2010 8:46 AM
To Next Page
Loading...
