English | 15
Bosch Power Tools 1 609 929 M94 | (16.10.07)
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling in
wood, metal and plastic. Machines with electron-
ic control and right/left rotation are also suitable
for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck
2 Spindle lock button
3 “Drilling/Impact Drilling” selector switch
4 Lock-on button for On/Off switch
5 On/Off switch
6 Thumbwheel for speed preselection
7 Rotational direction switch
8 Button for depth stop adjustment
9 Wing bolt for adjustment of auxiliary handle
10 Auxiliary handle*
11 Depth stop*
12 Chuck key*
13 Key chuck*
14 Allen key**
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope)
Technical Data
Impact Drill PSB 700 RE PSB 740 RE
Article number
0 603 386 4.. 0 603 386 472
Rated power input
W701740
Output power
W360380
No-load speed
rpm 0 – 3000 0 – 3000
Impact rate
bpm 48000 48000
Rated torque
Nm 1.9 2.1
Spindle lock
z z
Spindle collar dia.
mm 43 43
Max. drilling dia.
–Concrete
– Steel
–Wood
mm
mm
mm
16
12
30
16
12
30
Chuck clamping range
mm 1.5 – 13 1.5 – 13
Weight according to EPTA-Procedure
01/2003
kg 1.7 1.7
Protection class
/II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
OBJ_BUCH-541-001.book Page 15 Tuesday, October 16, 2007 11:38 AM
To Next Page
Loading...
