English - 1
1 AutoLock (keyless chuck)
2 “Drilling/Impact Drilling” selector switch
3 Power control adjusment knob
(PSB 1200-2 RPE)
4 Selector switch “Drilling/Driving”
5 Lock-on button for On/Off switch
6 On/Off switch
7 Rotational direction switch
8 Gear selector
9 Button for depth stop adjustment
10 Winged screw for auxiliary handle
adjustment
11 Auxiliary handle
12 Depth stop
13 Chuck key*
14 Key chuck*
15 Thumbwheel for speed preselection
(PSB 850-2 RE)
16 Allen key*
* Not all of the accessories illustrated or described are
included as standard delivery.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served.
■ Wear protective glasses and hearing protec-
tion. Wear sturdy shoes.
■ For long hair, wear hair protection. Work only
with closely fitting clothes.
■ If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
■ Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
■ Insert the mains plug only when the machine is
switched off.
■ Always direct the cable to the rear away from
the machine.
■ When drilling use the auxiliary handle 11.
Tool Specifications
Impact Drill PSB 850-2 RE PSB 1000-2 RE PSB 1200-2 RPE
Order number 0 603 171 5.. 0 603 171 6.. 0 603 171 7..
Rated power [W] 850 1010 1200
Output power [W] 430 510 610
No-load speed
1st gear [rpm] 0 – 1 000 0 – 1 000 0 – 1 000
2nd gear [rpm] 0 – 2 800 0 – 2 800 0 – 2 800
Impact rate max. [bpm] 44 800 44 800 44 800
Speed Preselection • • •
Power Control – – •
Keyless Chuck • • •
Spindle lock (AutoLock) • • •
Chuck clamping range max. [mm] 13 13 13
Drilling dia., steel max. [mm] 13 16 16
Drilling dia., wood max. [mm] 40 40 40
Drilling dia., concrete max. [mm] 20 20 20
Weight approx. [kg] 2.8 2.8 2.8
Protection class / II / II / II
Please observe the order number of your machine. The trade names of the individual machines may vary.
Machine Elements For Your Safety
8 • 2 609 932 245 • 02.07
To Next Page
Loading...
