EasyManua.ls Logo

Bosch PSR 10,8 LI - Operation and Controls; Starting and Using the Tool

Bosch PSR 10,8 LI
318 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English | 47
Bosch Power Tools 2 609 003 652 | (5.2.09)
Certain dusts, such as oak or beech dust, are consid-
ered as carcinogenic, especially in connection with
wood-treatment additives (chromate, wood preserva-
tive). Materials containing asbestos may only be
worked by specialists.
Provide for good ventilation of the working place.
It is recommended to wear a P2 filter-class respira-
tor.
Observe the relevant regulations in your country for
the materials to be worked.
Operation
Starting Operation
Reversing the Rotational Direction (see figure F)
The rotational direction switch 8 is used to reverse the ro-
tational direction of the machine. However, this is not
possible with the On/Off switch 9 actuated.
Right Rotation: For drilling and driving in screws, push
the rotational direction switch 8 left to the stop.
The indicator for right rotation 4 lights up when
the On/Off switch 9 is actuated and the motor is
running.
Left Rotation: For loosening or unscrewing screws, push
the rotational direction switch 8 right to the stop.
The indicator for left rotation 6 lights up when the
On/Off switch 9 is actuated and the motor is run-
ning.
OBJ_BUCH-623-003.book Page 47 Thursday, February 5, 2009 4:00 PM

Related product manuals