EasyManua.ls Logo

Bosch PUE B Series - Basic Settings Configuration; Power Management Function

Bosch PUE B Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic settings en
15
QBasic settings
Ba s i c set t i ngs
The appliance has various basic settings. These basic
settings can be altered to suit your individual
requirements.
Indicator/
symbol
Function
™‚
Childproof lock
Manual*.
Automatic.
ƒ Function deactivated.
™ƒ
Signal tones
Confirmation and fault signals are switched off.
Only the fault signal is switched on.
ƒ Only the confirmation signal is switched on.
All signal tones are switched on.*
™†
Automatically programming the cooking time
‹‹ Switched off.*
‹‚-ŠŠ Time until automatic switch-off.
™‡
Audible signal duration for the timer function
10 seconds.*
ƒ 30 seconds.
1 minute.
™ˆ
Power management function. Limiting the total power of the hob
The available settings depend on the maximum power of the hob.
Deactivated. Maximum power of the hob. */**
1000 W minimum power.
. 1500 W
...
3000 W recommended for 13 A.
. 3500 W recommended for 16 A.
4000 W
. 4500 W recommended for 20 A.
...
Š or Š. Maximum power of the hob.**
™Š
Time for selecting the cooking zone
Unlimited: The hotplate that was last set remains selected.*
Limited: The cooking zone only remains selected for a few seconds.
™‚ƒ
Check the cookware and the cooking results
Not suitable
Not perfect
ƒ Suitable
™ƒ„
Automatic management with power limitation
Deactivated: Shows the power limitation according to the power management function.*
Activated: Does not show the power limitation of the power management function.

Related product manuals