Bosch PVW8 HB Series - 10.2 Switching on CombiZone; 10.3 Switching off CombiZone; 11 Time-setting options; 11.1 Switch-off timer

Time-setting options en
11
10.2 Switching on CombiZone
1.
Select one of the two cooking zones and set the
power level.
2.
Press ⁠.
a The function is activated.
10.3 Switching off CombiZone
▶
Touch ⁠.
a The function is switched off.
a The two cooking zones once again operate inde-
pendently of one another.
Time-setting options
11 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
The button is assigned to the Switch-off timer func-
tion by default. However, you can also assign one of
the above-mentioned functions to the sensor.You can
change these settings via the Home Connect app or in
the basic settings →Page13.
11.1 Switch-off timer
Allows you to programme a cooking time for one or
more cooking zones and their automatic switch-off
once the time set has elapsed.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Press ⁠.
a and light up.
3.
Within the next 10seconds, set the required cook-
ing time in the settings area.
‒ You can set intermediate values between 1
minute and 9 minutes in increments of 30
seconds. To do this, use to select the intermedi-
ate values.
‒ To select a time in hours, e.g. 1h 30mins, press
the numerical sequence 1 - 3 - 0 in the settings
area. If you select a time of more than
60minutes, the time is automatically displayed in
hours.
4.
Touch to confirm.
a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds.
Changing or switching off Switch-off timer
1.
Select the cooking zone and then touch ⁠.
2.
To switch off the function, change the cooking time
or set it to ⁠.
11.2 Timer
Enables a clock to be activated. This function operates
independently of the cooking zones and other settings.
It does not automatically switch off the cooking zones.
Switching on Timer
Requirement:Assign the function to ⁠.
1.
Press ⁠.
2.
Select the required time.
a The time starts to elapse.
a A signal tone sounds and the displays flash once
the time has elapsed.
Changing or switching off the Timer
1.
Press ⁠.
2.
To switch off the function, change the cooking time
or set it to ⁠.
PowerBoost
12 PowerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using ⁠.
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, ⁠and ⁠ flash on the display for
the selected cooking zone. ⁠is then set automatically
without activating the function.
12.1 Switching on PowerBoost
1.
Select the cooking zone.
2.
Touch
a The ⁠display lights up.
a The function is activated.
12.2 Switching off PowerBoost
1.
Select the cooking zone.
2.
Touch .
a The ⁠display goes out and the cooking zone
switches back to power level
a The function is switched off.
Note:In certain circumstances, the appliance switches
this function off to protect the electronic elements in-
side the hob.