Bosch Rexroth 4WS2EM 10 Series - Disassembly and removal

Disassembly and removal 39/48
RE29583-XL-B/09.20, 4WS2EM 10...XL..., BoschRexrothAG
Table 16: FKM profile seal for filter screw
Material number
FKM profile seal item (3) for filter screw M16 x 1.5 R900012503
In case of questions regarding spare parts, please contact the competent
Rexrothservice:
BoschRexrothAG
Service Hydraulics
Bürgermeister-Dr.-Nebel-Str. 8
97816 Lohr am Main
Tel: +49 (0) 9352/40 50 60
service@boschrexroth.de
For the addresses of our sales and service network please refer to:
www.boschrexroth.com/adressen
11 Disassembly and removal
WARNING
Danger of damage to property and personal injury at pressurized and energized
system parts!
When working at pressurized and energized system parts, there is the danger of
injury by leaking hydraulic fluid or electric current.
▶ Before disassembly, ensure that the hydraulic system is depressurized and the
electrical control is de-energized.
Explosion hazard and/or risk of fire due to the ignition of an existing explosive
atmosphere!
Serious injury caused by explosion pressure and fire may result.
▶ During disassembly and exchange work, there may be no explosive atmosphere.
▶ The machine end-user of the system must provide suitable environmental
conditions.
Explosion hazard!
A disassembly of the valve cap or the connector will lead to loss of the explosion
protection!
▶ Never disassemble the valve cap or connector.
CAUTION
Falling of an incompletely disassembled valve!
An incompletely disassembled valve may fall down and cause injury.
▶ During disassembly, secure the valve against falling.
FKM profile seal for
filter screw