RE95290-01-B/2021-09-13, BoschRexrothAG
Safety instructions | BODAS speed sensors 9/36
▶ The DSA/12 and DSM/20 sensors are media resistant for the following media in
the connector zone:
HLP, HVLP, HETG, HEPG, HEES, HFA, HFB, HFC, HFD, 10W-40MC, Fertilizer,
AdBlue, RME (Biodiesel), SAE80W-90, antifreeze, brake fluid, SAE20W20,
gasoline, diesel, tar remover and cleaner solvent.
The DSA/12 and DSM/20 sensors are media resistant for the following media in
the sensor zone:
HLP, HVLP, HETG, HEPG, HEES, HFA, HFB, HFC and HFD
Connector
zone
Sensor
zone
Fig. 1: Connector and sensor zone at DSA/12 and DSM/20
▶ The DSA/20 and DST/10 sensors are media resistant for the following media in
the connector and cable zone:
Hydraulic fluids based on mineral oils according to DIN 51524, HETG, HEPG,
HEES, HFA and HFB (only suitable for HNBR seal), HFC, HFD (only suitable for
FKM seal), HFE, 10W-40MC, fertilizer, AdBlue, battery acid, SAE80W-90,
antifreeze, brake fluid, SAE20W20, gasoline, diesel, RME (biodiesel),
tar remover, cleaner solvent.
The DSA/20 and DST/10 sensors are media resistant for the following media in
the sensor zone:
Hydraulic fluids based on mineral oils according to DIN 51524, HETG, HEPG,
HEES, HFA and HFB (only suitable for HNBR seal), HFC, HFD (only suitable for
FKM seal), HFE.
Connector
zone
Sensor
z
one
Connector
zone
Sensor
z
one
Fig. 2: Connector and sensor zone at DSA/20 (left) and DST/10 (right)
▶ The DSM/10 sensor is media resistant for the following media:
NPK (7.5 / 7.5 / 7.5), ethylene glycol, diesel according to ISO16750-5, engine oil
according to ISO16750-5, biodiesel, hydraulic oil, cleaner solvent, antifreeze,
brake fluid according to ISO16750-5, spirit, coffee.
DSA/12 and DSM/20
DSA/20 and DST/10
DSM/10