5-16 Instructions for Use Rexroth Diax 04 HDD and HDS
DOK-DIAX04-HDD+HDS*UL*-IB01-EN-P
Touch Guard at Devices
WARNING
Lethal electric shock caused by live parts with
more than 50 V!
• The appropriate touch guard must be mounted for
each device following connection work.
• Never mount a damaged touch guard.
• Immediately replace a damaged touch guard by an
undamaged touch guard.
• Keep the cutouts at the touch guard as small as
possible. Only remove the cutouts if necessary.
Abb. 5-27: Supply unit (left) and drive controllers with touch guards
Sizing of Enclosure and Control Cabinet
Control Cabinet with Multiple-Line Structure
Note: Particular attention should be paid to the maximum allowed air
intake temperature of components when they are arranged in
multiple lines in the control cabinet. Where necessary, cooling
air guides are to be provided with blowers specially used for
this purpose.
To Next Page
Loading...
