Bosch Rexroth IM24V - Commissioning; Commissioning safety and procedure; Operation

24/84 Bosch Rexroth AG IM24V | 3 609 929 B37/2008-09
7 Commissioning
Fig. 6: Example: Slots B1, B2 on the CS351 Compact System
7 Commissioning
• Before commissioning, check that all plug-
in connections have the correct seat.
• Switch on the power supply for the system
components.
With the exception of the jumpers described
in section 4, there are no further setting
elements on the IM24V interface module.
8 Operation
Operation is not necessary while running.
1M24V
1
17
9
1
24
C5
C4
C2
C3
C1
16
8
X7E1
X3U1
X3U2
XDN1
X6C1
X3C1
XDV1
X3U4
X3U3
Reset
B2
XDD1
X1S1
B1
A
NOKOK FG
Rexroth
CS351
CAUTION
Risk of injuries and damage
to property!
Commissioning of the IM24V
interface module requires basic
mechanical and electrical
knowledge.
y Only qualified personnel are
authorized to commission the
system (see “Personnel
qualifications” on page 17).
IM24V.book Seite 24 Donnerstag, 25. September 2008 1:13 13