IndraControl L40 Display and Operating Components 6-1
DOK-CONTRL-IC*L40*****-PR02-EN-P
6 Display and Operating Components
On its front, the IndraControl L40 is provided with the following display
and operating components: a single-line display with four operator keys
as well as a light-emitting diode and a Reset button.
6.1 Display and Operator Keys
The display is an LCD display comprising 8 digits (5 x 10 dot matrix).
Anzeige.tif
Fig. 6-1: Display with four operator keys
The following functions are assigned to the four operator keys at the
bottom of the display (from left to right):
• Esc
Move back to the last lower level.
(Note: If you exit a menu with Esc, any changes you made in that
menu will not be applied.)
• Down arrow
Navigate within a menu (down) or decrement parameters to be set.
• Up arrow
Navigate within a menu (up) or increment parameters to be set.
• Enter
Confirm your entry or call the next higher menu level.
Display
Operator Keys
IAS COMPONENTS www.ias-components.com info@ias-components.com
To Next Page
Loading...
